| Specification | Rev | Title |
| MIL-A-12352 | A | Anti-seize Compound, use TT-S-1732 |
| MIL-A-13881 | B | Anti-seize Compound, Mica-Base |
| MIL-A-21180 | D | Aluminum-Alloy Castings-High Strengthen |
| MIL-A-21380 | B Amend 1 | Abrasive Material for Blasting |
| MIL-A-22262 | B (SH) | Abrasive Blasting Media Ship Hull Blast Cleaning |
| MIL-A-46106 | B | Adhesive-Sealants, Silicone |
| MIL-A-63576 | A notice 1 | Aluminum Oxide Coating, Lubricative, for Aluminum and Aluminum Alloys |
| MIL-A-82484 | NOTICE 1 | Adhesive-Sealants Compounds |
| MIL-A-8625 | F | Anodic Coating for Aluminum |
| MIL-A-9067 | C notice 2 | Adhesive Bonding, Process and Inspection Requirements for |
| MIL-A-907 | E | Anti-seize Thread Compound |
| MIL-B-121 | F | Barrier Material |
| MIL-B-233 | A | Boxes, Repair Parts |
| MIL-B-45022 | C Amend 1 | Blast Cleaning Cabinets |
| MIL-B-5087 | B | Bonding, Electrical & Lightning Protection |
| MIL-B-6812 | E notice 1 | Cancelled and Superseeded by NASM6812 |
| MIL-B-8964 | _ | Beryllium Sheet & Plate |
| MIL-C-10578 | D | Corrosion Removing and Metal Conditioning |
| MIL-C-10578 | D notice 3 | Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base) |
| MIL-C-11436 | _ | Chromium, Gray Plates |
| MIL-C-11796 | C | Corrosion Preventative Compound, Petrolatum Hot Application |
| MIL-C-12968 | _ | Phosphate (for Iron & Steel) |
| MIL-C-13924 | C amdt 1 | Black Oxide for Ferrous Metals |
| MIL-C-14538 | C | Chromium Plating, Black |
| MIL-C-14550 | B Notice 1 | Copper Plating (Electrodeposited) |
| MIL-C-15074 | E | Corrosion Preventative , Fingerprint Remover |
| MIL-C-16173 | E | Corrosion Preventative Compound |
| MIL-C-17504 | B Amend 2 | Acrylic Clear Coating Compound |
| MIL-C-17711 | B | Coatings, Chromate, for Zinc Alloy Castings and Hot-Dip Galvanized Surfaces |
| MIL-C-20218 | F | Chromium Plating |
| MIL-C-21567 | A | Compound, Silicone, Soft Film |
| MIL-C-22543 | E | Alkaline-Organic Water Bare Emulsion |
| MIL-C-22750 | F | Epoxy, High Solids |
| MIL-C-22751 | D Amend 1 | Epoxy-Polamide |
| MIL-C-24707 | _ | General Requirement, Castings, Ferrous |
| MIL-C-25769 | J | Cleaning Compound |
| MIL-C-26074 | E | Electroless Nickel |
| MIL-C-26500 | E | Connectors, General Purpose |
| MIL-C-26636 | A | Contacts, Crimp Type |
| MIL-C-27725 | B | Coatings, Corrosion-Preventive, for Aircraft Integral Fuel Tanks |
| MIL-C-29602 | Amend 2 | Cleaning Compound for Parts Washers & Spray Cabinets |
| MIL-C-38736 | B notice 2 | Cleaning Compound, Solvent Mixtures |
| MIL-C-43616 | C | Cleaning Compound |
| MIL-C-450 | C | Bituminous Solvent Type, Black |
| MIL-C-45662 | A | Calibration System Requirements |
| MIL-C-46168 | D(3) | Aliphatic Polyurethane, CARC |
| MIL-C-47267 | _ | Cleaning Surface Preparation, Vapor Blasting |
| MIL-C-5056 | _ | Permanent Resin |
| MIL-C-53039 | A | Coating, Aliphatic Polyurethane, Single Component, CARC |
| MIL-C-53072 | B | Chemical Agent Resistant Coating |
| MIL-C-5541 | E | Chemical Conversion Coatings on Aluminum Alloys |
| MIL-C-7024 | D | Calibrating Fluids |
| MIL-C-81309 | E | Corrosion Preventative Compounds, Water Displacing, Ultra Thin Film |
| MIL-C-81562 | B | Cadmium, Tin Cadmium & Zinc |
| MIL-C-81706 | INT AM 5 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| MIL-C-81769 | _ | Chemical Milling of Metals |
| MIL-C-81773 | C | Polyurethane, Alphatic, Weather-Resistant -CANCELLED- See MIL-C-83286 |
| MIL-C-8188 | C | Corrosion-Preventative Oil |
| MIL-C-83286 | B | Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications |
| MIL-C-83488 | C | Coating, Aluminum High Priority (Now MIL-DTL-3488) |
| MIL-C-85054 | A | Corrosion Preventative Compound |
| MIL-C-8507 | D notice 1 | Coating, Wash Primer (Pretreatment) for Metals, Application of (for Aeronautical Use) |
| MIL-C-8514 | C Amd 1 | Coating Compound, Metal Pretreatment, Resin-Acid |
| MIL-C-85285 | B | Polyurethane, High Solids |
| MIL-C-85455 | _ | Chromium-Molybdenum Plating |
| MIL-C-87115 | A | Immersion Zinc Flake/Chromate Dispersion |
| MIL-C-8779 | E | Color, Interior, Aircraft, Requirements for |
| MIL-C-8837 | B | Coating, Cadmium (Vacuum Deposited) |
| MIL-D-23003 | A | Deck Covering Compound |
| MIL-D-5549 | B | Cellulose-Acetate-Butyrate |
| MIL-D-85445 | _ | Detecting-Ranging Set |
| MIL-DTL-0053022 | C | Primer, Epoxy Coating, Corrosion Inhibiting Lead And Chromate Free |
| MIL-DTL-13924 | D | Black Oxide-Ferrous Metals |
| MIL-DTL-14072 | E | Finishes for Ground Based Electronic Equipment |
| MIL-DTL-14538 | D | Chromium Plating, Black |
| MIL-DTL-15024 | F | Plates, Tags and Bands for Identification of Equipment, General Specification for |
| MIL-DTL-15090 | D | Enamel, Equipment, Light Gray (Navy Formula No. 111) NO QPL |
| MIL-DTL-16232 | G | Phosphate, Heavy Manganese or Zinc Base |
| MIL-DTL-18240 | F amdt 1 | Fastener Element, Self-Locking, Threaded Fastener, 250 F Maximum |
| MIL-DTL-23422 | F | Chrome Plating, Electrodeposited |
| MIL-DTL-24441 | C(SH) Int. Amd 1 | Paint, Epoxy-Polyamide, General Specification for |
| MIL-DTL-26074 | F Notice 1 | Coating, Electroless Nickel, Requirements for |
| MIL-DTL-32119(SH) | | Coatings , Electroless Nickel , Special Applications |
| MIL-DTL-3688 | C | Wax Emulsion (Rust Inhibiting) |
| MIL-DTL-52022 | C | Primer, Epoxy Coating, Corrosion Inhibiting Lead And Chromate Free |
| MIL-DTL-53039 | B | Coating, Aliphatic Polyurethane, Single Component |
| MIL-DTL-53072 | C | CARC System |
| MIL-DTL-5541 | F | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-DTL-64159 | _ | Coating, Water Dispersible Alphatic Polyurethane, Chemical Agent Resistant |
| MIL-DTL-781 | H | Terminal, Wire Rope Swaging, General Specification for |
| MIL-DTL-81706 | B Amend 1 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| MIL-DTL-83488 | D | Coating, Aluminum, High Purity |
| MIL-E-1 | _ | Electron Tubes |
| MIL-E-15090 | D | Enamel, Equipment, Light Gray (Formula No. 111) NO QPL |
| MIL-E-16400 | H Notice 1 | Electronic, Interior Communication |
| MIL-E-16663 | A Amend 1 | Enamel, Semi-Enamel |
| MIL-E-22118 | B | Enamel, Electrical - Insulating |
| MIL-E-24635 | B | Enamel, Silicone Alkyd Copolymer |
| MIL-E-46096 | C Amend 1 | Enamel, Lustrous, Quick Drying |
| MIL-E-46136 | A Amend 2 | Enamel, Semi-Gloss, Alkyd, Solar Heat Reflecting, Olive Drab |
| MIL-E-52227 | A NOTICE 1 | Enamel, Semi-Gloss, Quick Drying (Canceled - See MIL-L-52043) |
| MIL-E-52798 | _ | Enamel, Alkyd, Camouflage |
| MIL-E-52835 | A | Enamel, Modified Alkyd, Camouflage, Lusterless |
| MIL-E-52891 | B | Enamel, Lusterless, Zinc Phosphate, Styrenated, Alkyd Type |
| MIL-E-5400 | T Amd 2 | Electrical Equipment, Aerospace, General Specification for |
| MIL-E-5556 | B | Enamel, Camouflage, Quick Drying |
| MIL-E-5558 | A Notice 1 | Enamel: Wrinkle-Finish, For Aircraft Use ( Canceled ) |
| MIL-E-7729 | B | Enamel, Gloss |
| MIL-F-14072 | D | Finishes for Ground Based Electronic Equipment |
| MIL-F-14256 | F Notice 1 | Flux, soldering, Liquid, Past Flux, Soldering Paste and Soldering-Past Flux, (for Electronic/Electrical Use), General Specification for |
| MIL-F-18264 | D Amdt 2 | Finishes: Organic, Weapons System, Application & Control of |
| MIL-F-18280 | F Notice 1 | Fittings, Flareless Tube, Fluid Connection |
| MIL-F-18866 | H | Fittings, Hydraulic Tube, Flared, 37 Degree & Flareless, Steel |
| MIL-F-35081 | E Notice 1 | Fat, Hydrogenated, Vegetable |
| MIL-F-495 | E Notice 2 | Finish, Chemical, Black, For Copper Alloys |
| MIL-F-5509 | D Supp 1 Not 2 | Fittings, Flared Tube, Fluid Connection |
| MIL-F-7179 | G | Finishes, Coatings, Sealants |
| MIL-G-23827 | C | Grease, Aircraft & Instrument, Gear & Actuator Screw |
| MIL-G-45204 | C | Gold Plating, Electrodeposited |
| MIL-G-5514 | G | Gland Design; Packing's, Hydraulic |
| MIL-G-5634 | C | Grain, Abrasive, Soft, Carbon Removal |
| MIL-G-9954 | A Amend 3 | Glass Beads: For Cleaning & Peening |
| MIL-H-13528 | B | Hydrochloric Acid, Inhibited, Rust-Removing |
| MIL-H-18911 | A Notice 2 | Heads & Motors, Rocket, Inert Parts, Painting & Marking |
| MIL-H-5606 | G | Hydraulic Fluid, Petroleum Base; Aircraft, Missile & Ordnance |
| MIL-H-6083 | E | Hydraulic Fluid, Petroleum Base, for Preservation & Operation |
| MIL-H-6088 | G Amend 1 | Heat Treatment of Aluminum Alloys |
| MIL-H-6875 | H | Process for Heat Treatment of Steel |
| MIL-HDBK-132A | A | Protective Finishes for Metal & Wood Surfaces |
| MIL-HDBK-1516 | _ | Unified Code for Coatings & Finishes for DOD Materiel |
| MIL-HDBK-2036 | - | Preparation of Electronic Equipment Specifications |
| MIL-HDBK-205 | A | Phosphate & Black Oxide Coating of Ferrous Metals |
| MIL-HDBK-454 | A | General Guidelines for Electronic Equipment |
| MIL-HDBK-52B | _ | Evaluation of Contractor's Calibration System |
| MIL-HDBK-5400 | 30/11/1995 | Electronic Equipment, Airborne General Guidelines for |
| MIL-HDBK-729 | NOTICE 1 | Corrosion & Corrosion Prevention Metals |
| MIL-HDBK-808 (USAF) | - | Finish, Protective & Codes for Finishing Schemes for Ground & Ground Support & Equipment |
| MIL-I-13857 | B Notice 1 | Impregnation of Metal Castings |
| MIL-I-25135 | E | Inspection Materials, Penetrants |
| MIL-I-43553 | B | Ink, Marking, Epoxy Base |
| MIL-I-45208 | A Amend 2 | Inspection System Requirements |
| MIL-I-46058 | C | Insulating Compound, Electrical |
| MIL-I-6870 | E | Inspection Program Requirements, Nondestructive for Aircraft & Missile Materials & Parts |
| MIL-I-8474 | C Notice 2 | Inspection of Aluminum Alloy Parts, Anodizing Process for |
| MIL-I-8500 | D | Interchangeability & Replaceability of Component Parts for Aerospace Vehicles |
| MIL-L-0046010 | E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting |
| MIL-L-10287 | B | Lacquer, Cellulose Nitrate, for Identification of Small Arms Ammunition |
| MIL-L-11195 | D | Lacquer, Lusterless, Hot Spray |
| MIL-L-13629 | C | Lacquer: Air-Drying, for Crimped Parts |
| MIL-L-13762 | B | Lead Alloy Coating, Hot Dip (for Iron & Steel Parts) |
| MIL-L-13808 | B | Lead Plating, Electrodeposited |
| MIL-L-14486 | A | Lacquer, Vinyl Resin, Semi-Gloss |
| MIL-L-19537 | C Notice 1 | Lacquer: Acrylic-Nitrocellulose Gloss (for Aircraft use) |
| MIL-L-19538 | C | Lacquer; Acrylic Nitrocellulose, Camouflage (for Aircraft use) |
| MIL-L-23398 | D | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting |
| MIL-L-24131 | B | Lubricant, Colloidal Graphite in Isopropanol |
| MIL-L-25681 | D | Lubricant, Molybdenum Disulfide, Silicone |
| MIL-L-3150 | C Amend 2 | Lubricating Oil, Preservative, Medium |
| MIL-L-3572 | A | Lubricant, Colloidal Graphite in Oil |
| MIL-L-46010 | E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting |
| MIL-L-46147 | B | Lubricant, Solid Film, Air Cured (Corrosion Inhibiting) |
| MIL-L-46149 | _ | Lacquer, Acrylic, Low Reflective |
| MIL-L-52043 | C | Lacquer, Semi-Gloss, Cellulose Nitrate |
| MIL-L-60326 | Amend 1 | Lubricant, Fluorocarbon Telomer Dispersion |
| MIL-L-6085 | C | Lubricating Oil, Instrument, Aircraft, Low Volatility |
| MIL-L-63460 | D Amend 3 | Lubricant, Cleaner & Preservative |
| MIL-L-7808 | J | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| MIL-L-81329 | D Amd 1 | Lubricant, Solid Film, Extrme Environment NATO Code Number S-1737 |
| MIL-L-81352 | A | Lacquer, Acrylic |
| MIL-L-87132 | B | Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners |
| MIL-L-8937 | D | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting |
| MIL-M-10578 | B | Metal Conditioner & Rust Remover (Phosphoric Acid Base) |
| MIL-M-13231 | C | Marking of Electronics Items |
| MIL-M-13508 | C Amend 1 | Mirror, Front Surfaced Aluminized |
| MIL-M-18012 | B | Design & Configuration of Markings for Aircrew Displays |
| MIL-M-3171 | C | Process for Pretreatment & Prevention of Corrosion on Magnesium Alloy |
| MIL-M-45202 | C notice 2 | Anodic Treatment of Magnesium Alloys/ Canceled 1/4/1981 |
| MIL-M-46080 | _ | Anodic cleaning & surface sealing of Magnesium Castings |
| MIL-M-6874 | Notice 4 | Process for Metal Spraying |
| MIL-M-7752 | A | Metal Cleaner Silicate-Soap |
| MIL-M-7866 | C | Molybdenum Disulfide, Technical, Lubrication Grade |
| MIL-P-116 | J | Methods of Preservation |
| MIL-P-14105 | D | Paint, Heat-Resisting (For Steel Surfaces) |
| MIL-P-15930 | C | Primer Coating, Shipboard, Vinyl-Zinc Chromate |
| MIL-P-15931 | F | Paint, Antifouling, Vinyl (Formula No.. 121A & 129A) |
| MIL-P-16189 | B | Paint, Antifouling, Vinyl, Black (Formula No.. 129/63) |
| MIL-P-17141 | _ | Plating, Protective for Inert Fuse Parts |
| MIL-P-18317 | _ | PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BROZE, OR STEEL |
| MIL-P-21563 | B | PAINT SYSTEM, FLUORECENT, FOR AIRCRAFT APPLICATION |
| MIL-P-21600 | A | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| MIL-P-22332 | B | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| MIL-P-23236 | B | PAINT, COATING SYSTEMS, FUEL AND SALT WATER BALLAST TANKS (METRIC) |
| MIL-P-23377 | G | Primer Coatings, Epoxy, High Solids |
| MIL-P-23408 | B | TIN CADMIUM (ELECTRODEPOSITED) |
| MIL-P-24074 | ? | POLYTETRAFLUOROETHYLENE PARTS AND COATINGS AND POLYAMIDE PARTS |
| MIL-P-24441 | B | Paint, Epoxy-Polyamide, General Specification for |
| MIL-P-26915 | C | PRIMER COATING, FOR STEEL SURF |
| MIL-P-27418 | AS Notice 3 | Plating, Soft Nickel (Electrodeposited, Sulfamate Bath) |
| MIL-P-38336 | USAF NOT.1 | Primer Coating, Inorganic, Zinc Dust Pigmented, Self Curing for Steel Surfaces |
| MIL-P-45209 | B | Palladium Plating, Electrodeposited |
| MIL-P-46002 | B Amend 3 | Preservative Oil, Contact & Volatile Corrosion-Inhibited |
| MIL-P-46105 | _ | Primer Coating, Weld Through, Zinc-Rich |
| MIL-P-47115 | A Notice 1 | Paint, Epoxy, Abrasion, Heat and Corrosion Resistance |
| MIL-P-50002 | B NOTICE 1 | Phosphate Coating Compounds for Phosphating Ferrous Materials |
| MIL-P-52192 | B Notice 2 | Primer Coating Epoxy |
| MIL-P-53022 | B | Primer, Epoxy, Corrosion Inhibiting, Lead and Chromate Free |
| MIL-P-53030 | A | Primer, Epoxy, Water Reducible, Lead and Chromate Free |
| MIL-P-53084 | ME Amdt 1 | Primer , Cathodic Electrodeposition, Chemical Agent Resistant |
| MIL-P-6808 | C | Primer Coating , Zinc Chromate |
| MIL-P-6859 | _ | Plating Nickel |
| MIL-P-7962 | D | Primer Coating, Cellulose-Nitrate Modified Alkyd Type, Corrosion-Inhibiting, Fast-Drying |
| MIL-P-8116 | B | Putty, Zinc Chromate, General Purpose |
| MIL-P-81728 | A | Plating, Tin Lead (Electrodeposited) |
| MIL-P-83348 | AMD 1 | Powders, Plasma Spray |
| MIL-P-85582 | B A/1 | Primer Coatings: Epoxy, Waterborne |
| MIL-P-8585 | A | Primer Coating, Zinc Chromate, Low-Moisture-Sensitivity |
| MIL-P-8793 | A Notice 2 | Paint (Gloss & Nonspecular) |
| MIL-PRF-16173 | E Amdt 1 | Corrosion Preventative Compound, Solvent Cutback, Cold Application |
| MIL-PRF-22750 | F | Epoxy, High Solids |
| MIL-PRF-23236 | C | Paint coating systems, fuel & salt water |
| MIL-PRF-23377 | J Amdt 2 | Primer Coatings; Epoxy, High Solids |
| MIL-PRF-23699 | F | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Number O-156 |
| MIL-PRF-24635 | C(SH) Amend 1 | Enamel, Silicone Alkyd Copolymer (Metric) |
| MIL-PRF-24667 | A | COATING SYSTEM , NON-SKID, FOR ROLL OR SPRAY APPLICATION |
| MIL-PRF-24712 | A | Coatings, Powder (Metric) |
| MIL-PRF-26915 | D | PRIMER COATING, FOR STEEL SURFACES |
| MIL-PRF-3043 | C | Permanent Resin Coating, for Engine Components and Metal Parts |
| MIL-PRF-3150 | DAmdt 1 | LUBRICATING OIL, PRESERVATIVE, MEDIUM |
| MIL-PRF-3420 | G | PACKAGING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE |
| MIL-PRF-46010 | F | LUBRICANT,SOLID FILM ,HEAT CURED, CORROSION INIHIBITING |
| MIL-PRF-46147 | D | Lubricant, Solid Film, Air Cured (Corrosion Inhibiting) |
| MIL-PRF-6083 | F | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| MIL-PRF-6085 | D | LUBRICATING OIL, INSTRUMENT,AIRCRAFT, LOW VOLATILITY |
| MIL-PRF-6086 | E | LUBRICATING OIL, GEAR, PETROLEUM BASE |
| MIL-PRF-61002A | | |
| MIL-PRF-63460 | D | LUBRICANT, CLEANER & PRESERVATIVES FOR WEAPONS AND WEAPONS SYSTEMS |
| MIL-PRF-680 | B | Performance Specification Degreasing Solvent |
| MIL-PRF-7024 | E | CALIBRATING FLUIDS,AIRCRAFT FUEL SYSTEMS COMPONENTS |
| MIL-PRF-7808 | L | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-81329 | D | LUBRICANT , SOLID FILM ENVIROMENT, NATO CODE NUBER S-1737 |
| MIL-PRF-81352 | C | COATING, AIRCRAFT TOUCH UP |
| MIL-PRF-81733 | D | SEALING AND COATING COMPOUND, COROSION INHIBITIVE |
| MIL-PRF-8188 | D | CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-85285 | D amd 1 | Performance Specification Coating: Polyurethane, Aircraft and Support Equipment |
| MIL-PRF-85582 | D | PRIMER COATINGS, EPOXY, WATERBORNE |
| MIL-PRF-87937 | C AMND. 2 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-Q-9858 | A NOT. 1 | QUALITY PROGRAM REQUIREMENTS |
| MIL-R-25134 | | REMOVER, PAINT, AND LAQUER, SOLVENT TYPE |
| MIL-R-3043 | B | RESIN COATING, PERMANENT,FOR ENGINE COMPONENTS & METAL PARTS (CANCELED) |
| MIL-R-46082 | NOTICE 1 | RETAINING COMPOUNDS, SINGLE COM PONENT, ANAEROBIC |
| MIL-R-46085 | B NOTICE 1 | Rhodium Plating, Electrodeposited |
| MIL-R-63997 | AR AMT 4 | Military Specification for Rifle, 5.56MM: M16A2 |
| MIL-R-81128 | OS AMND. 1 | ROCKET MOTORS, IDENTIFICATION OF PARTS AND ASSEMBLIES, REQUIREMENTS FOR |
| MIL-R-81294 | D | remover, Paint, Epoxy, Polysulfide and Polyurethane Systems |
| MIL-R-83485 | 1 notice 3 | Rubber florocarbon elastomer, improved performance at low temp, o-rings, size |
| MIL-S-13165 | C AMND. 1 | SHOT PEENING OF METAL PARTS |
| MIL-S-15847 | A NOTICE 1 | SPRAY GUN AND ACCESSORIES, PAINT AND DOPE, AIRCRAFT USE |
| MIL-S-4383 | C | SEALING COMPOUND , TOP COAT, FUEL TANK BUNA-N TYPE |
| MIL-S-45180 | D | Sealing Compound, Gasket, Hydrocarbon Fluid & Water Resistant |
| MIL-S-46850 | D | STEEL: BAR, PLATE, SHEET ,STRIP,FORGINGS,AND EXTRUSIONS |
| MIL-S-5000 | D | STEEL,CHROME-NICKEL-MOLYDEMIUM, (E4340) BARS AND REFORGING STOCKS |
| MIL-S-5002 | D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-S-52779 | A | SOFTWARE QUALITY ASSURANCE PROGRAM REQUIREMENTS |
| MIL-S-6090 | A | STEEL, CARBURIZING AND NITRIDING |
| MIL-S-81733 | C | SEALING & COATING COMPOUND, CORROSION INHIBITIVE (SUPERCEDED BY MIL-PRF-81773D) |
| MIL-S-8844 | D AMD. 1 | STEEL BAR, REFORGING STOCK, AND MECHANICAL TUBING LOW ALLOY |
| MIL-STD-001303 | C | Painting of Naval Ordinance Equipment |
| MIL-STD-105 | E | Sampling Procedures & Tables for Inspection by Attributes |
| MIL-STD-109 | _ | Quality Assurance Terms & Definitions |
| MIL-STD-120 | _ | Gage Inspection |
| MIL-STD-1246 | C | Product Cleanliness Levels & Contamination Control |
| MIL-STD-129P | _ | LOGSA Packaging, Storage & Containerization |
| MIL-STD-130 | M | Identification Marking of U.S. Military Property |
| MIL-STD-1303 | C | Painting of Naval Ordnance Equipment |
| MIL-STD-1312 | B Notice 1 | Fastener Test Methods |
| MIL-STD-13231 | - | Marking of Electronics Items |
| MIL-STD-1500 | B Notice 1 | Cadmium-Titanium Plating, Low Embrittlement (Electrodeposition) |
| MIL-STD-1501 | D | Chromium Plating, Low Embrittlement (Electrodeposition) |
| MIL-STD-1504 | B | Abrasive Blasting |
| MIL-STD-1516 | B | Unified Code for Coatings & Finishes for DOD Materiel |
| MIL-STD-1587 | C | Materials & Process Requirements for Air Force Weapon Systems |
| MIL-STD-1687 | A | Thermal Spray Processes for Naval Ship Machinery Applications |
| MIL-STD-171 | E Notice 1 | Finishing of Metal & Wood Surfaces |
| MIL-STD-186 | F | Protective Finishing for Army Missile Weapon Systems |
| MIL-STD-1873 | A | Process for Mass Finishing |
| MIL-STD-1876 | _ | Processing for Nitriding, Gaseous Atmosphere |
| MIL-STD-1878 | _ | Process for Carburizing, Gaseous Atmosphere |
| MIL-STD-1884 | NOTICE 1 | Coating, Plasma Spray Deposition |
| MIL-STD-1916 | - | DOD Preferred Methods for Acceptance of Product |
| MIL-STD-193 | L | Painting Procedures & Marking for Vehicles, Construction Equipment, Material Handling Equipment & Spare Parts |
| MIL-STD-194 | A | Systems for Painting & Finishing Fire Control Material |
| MIL-STD-1949 | A | Inspection, Magnetic Particle |
| MIL-STD-202 | - | Solderability |
| MIL-STD-2036 | A | General Requirements for Electronics Equipment Specifications |
| MIL-STD-2073-1 | D | Standard Practice for Military Packaging |
| MIL-STD-2138 | A | Metal Sprayed Coatings for Corrosion Protection Aboard Naval Ships (Metric) |
| MIL-STD-2197 | _ | Brush Electroplating on Marine Machinery |
| MIL-STD-271 | F | Requirements for Nondestructive Testing Methods |
| MIL-STD-275 | E | Impregnation of Porous Metal Castings & Powdered Metal Components |
| MIL-STD-276 | A | Impregnation of Porous Metal Castings and Powered Metal Components |
| MIL-STD-410 | E | Nondestructive Testing Personnel Qualification & Certification |
| MIL-STD-419 | D | Cleaning, Protecting & Testing Piping, Tubing & Fittings for Hydraulic Power Transmission Equipment |
| MIL-STD-454 | N | Standard General Requirements for Electronic Equipment |
| MIL-STD-45662 | A | Calibration Systems Requirements |
| MIL-STD-464 | A | Electromagnetic Environmental Effects Requirements for Systems |
| MIL-STD-480 | B | Finish Methods |
| MIL-STD-5400 | _ | General requirements for Electronic Equipment, Airborne |
| MIL-STD-704 | F | Department of Defense Interface Standard; Aircraft Electric Power Characteristics |
| MIL-STD-709 | C Notice 2 | Ammunition Color Coding |
| MIL-STD-7179 | - | Finishes, Coatings, Sealants for the Protection of Aerospace Weapons Systems |
| MIL-STD-753 | C Notice 1 | Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation |
| MIL-STD-808 | A | Finishes, Materials and Processes for Corrosion Prevention and Control in Support Equipment |
| MIL-STD-810 | F(3) | Environmental Test Methods & Engineering Guidelines |
| MIL-STD-865 | C | Selective (Brush Plating), Electrodeposition |
| MIL-STD-867 | C | Temper Etch Inspection |
| MIL-STD-868 | A Notice 2 | Nickel Plating, Low Embrittlement, Electrodeposition |
| MIL-STD-869 | C Notice 1 | Flame Spraying |
| MIL-STD-870 | B NOTICE 1 | Cadmium Plating, Low Embrittlement, Electrodeposition |
| MIL-STD-871 | A Notice 3 | Electro-Chemical Stripping of Inorganic Finishes |
| MIL-STD-889 | B Notice 2 | Dissimilar Metals |
| MIL-STD-970 | Notice 1 | Order of Preference for the Selection of Standard & Specifications |
| MIL-T-10727 | C notice 1 | Tin Plating: Electrodeposited or Hot-Dipped for Ferrous & Nonferrous Metals |
| MIL-T-12879 | A notice 2 | Treatments, Chemical, Pre-paint & Corrosion Inhibitive for Zinc Surfaces |
| MIL-T-19588 | A (CG) Amend 1 | Toluene-Methyl Isobutyl Ketone Mixture |
| MIL-T-21014 | D | Composition, density & hardness properties |
| MIL-T-5542 | D (MI) | Thread Compound, Antiseize & Sealing Oxygen Systems |
| MIL-T-5544 | B | Thread Compound, Antiseize, Graphite-Petrolatum |
| MIL-T-6095 | B Amend 1 | Thinner, Cellulose-Nitrate-Dope, Blush-Retarding |
| MIL-T-6096 | A | Thinner, Cellulose Acetate Butyrate Dope |
| MIL-T-704 | K Notice 1 | Treatment & Painting of Material |
| MIL-T-7081 | D Amend 5 | Tube, Aluminum Alloy, Seamless, Round, Drawn 6061 Aircraft Hydraulic Quality |
| MIL-T-81533 | A Notice 1 | Trichloroethane 1,1,1, (Methyl Chloroform) Inhibited, Vapor Degreasing |
| MIL-T-81772 | B Amdt 1 | Thinner, Aircraft Coating |
| MIL-T-81955 | (OS) Notice 2 | Tin Plating, Immersion for Copper & Copper Alloys |
| MIL-V-13811 | A (OS) | Varnish, Moisture proof |
| MIL-V-173 | C (2) Notice 3 | Varnish, Moisture & Fungus Resistant (for Treatment of Communications, Electronics & Associated Equipment |
| MIL-W-13855 | E | General Specification for Weapon; Small Arms & Aircraft Armament Subsystems |
| MIL-W-3688 | C | Wax Emulsion (Rust Inhibiting) |
| MIL-W-5044 | C | Coating Compound, Nonslip (For Walkways) ; out of date - see A-A-59166 |
| MIL-W-63150 | Amendment 3 | Standard Quality Assurance Provisions for Weapons & Support Materiel |